Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Miele DA 206
Summary of Contents for Miele DA 206
-
Page 1: Operating Instructions
Operating instructions for Cooker Hoods DA 206, DA 209, DA 216, DA 216 EXT, DA 217, DA 217 EXT, DA 219, DA 219 EXT Q@ä It is essential to read these operating instructions before installing or using the machine to avoid the risk of accident or damage to the machine. -
Page 2: Table Of Contents
DA 206, DA 209 ........ - Page 3 Contents Installation Retaining plate ........... . 23 Vapour guide/canopy.
-
Page 4: Caring For The Environment
Caring for the environment Caring for the environment Disposal of packing material Disposal of your old machine / appliance The transport and protective packing has been selected from materials Old machines / appliances contain ma- which are environmentally friendly for terials which can be reclaimed or re- disposal and can normally be recycled. -
Page 5: Warning And Safety Instructions
Warning and Safety instructions Warning and Safety instructions Appropriate use of the cooker This appliance meets statutory hood safety requirements. Inappropriate use could however lead to risk of ac- The appliance is intended for do- cidents to the user and damage to mestic use only. - Page 6 Warning and Safety instructions The appliance is only completely Use of the appliance isolated from the electricity supply The appliance is not intended for when: use by young children or infirm per- – it is switched off at the wall socket sons without supervision.
- Page 7 These can be obtained from the be covered by the appliance guarantee. Miele Spare Parts department or from builders’ merchants. Installation The appliance must not be con-...
- Page 8 Warning and Safety instructions When using the cooker hood at the only for appliances with external fans same time as another heating ap- For appliances with an external fan pliance which depends on the air in the motor fitted (EXT models) the con- room, (e.g.
-
Page 9: Descripton Of The Functions
Descripton of the functions Descripton of the functions The cooker hood works with . . . an external fan The ...EXT models of cooker hoods are . . . Air extraction: designed to be connected with an ex- The air is drawn in and cleaned by the ternal fan. -
Page 10: Guide To The Appliance
Guide to the appliance Guide to the appliance DA 206, DA 209 Touch control for the hob lighting Touch control for the run-on option On/Off touch control Touch control for the grease filter Touch control- power level Touch control- active charcoal filter... -
Page 11: Da 216, Da 217, Da 219, Da 216 Ext, Da 217 Ext, Da 219 Ext
Guide to the appliance DA 216, DA 217, DA 219, DA 216 EXT, DA 217 EXT, DA 219 EXT Touch control for the hob lighting Touch control for the run-on option On/Off touch control Touch control for the grease filter Touch control - power level Touch control - active charcoal filter Extension piece... -
Page 12: Operation
Operation Operation To select the functions, press the Selecting the power level touch controls gently with your finger. Depending on how much the air needs to be filtered, there are four power le- Switching on vels available. For normal cooking a Set the main switch to "I". -
Page 13: Run-On Option
Operation Run-on option Switching off If the air still needs to be cleared after Use the On/Off touch control to cooking, the cooker hood can be set to switch the fan off. continue running. Only use the main switch if the cooker It will then switch off the fan motor auto- hood is not going to be used for a matically after a further 5 or 15 minutes. -
Page 14: Filter Operating Hours Counter
Operation Filter operating hours counter Reading the filter operating hours counter An indicator lamp shows when the grease filter needs to be changed. The Before reaching the end of the period operating hours counter for the grease set, you can check the percentage of filters is set at the factory for a certain the time set which has already been number of hours but these can be... -
Page 15: Altering The Filter Operating Hours Counter
Operation Active charcoal filter Altering the filter operating hours counter The active charcoal filter is used when the cooker hood is operated in recircu- You can match the maximum time for lation mode. It is not required for the air the operating hours counter to the type extraction mode. -
Page 16: Cleaning And Care
Cleaning and Care Cleaning and Care Before any cleaning or maintenance An over-greasy filter is a fire hazard. work the cooker hood must be dis- connected from the mains supply Some washing-up liquids or dish- washer detergents may cause the –... -
Page 17: Active Charcoal Filter
Cleaning and Care When removing the filters for clean- Active charcoal filter ing also clean off any residues of oil If the cooker hood is connected for re- or fat from the now accessible hous- circulation, an active charcoal filter ing to prevent the risk of these catch- must be inserted in addition to the ing fire. -
Page 18: Changing A Light Bulb
Cleaning and Care Changing a light bulb Disconnect the cooker hood from the mains supply by – switching it off at the wall socket and removing the plug (do not pull on the cable, only on the plug), or – the mains fuse is withdrawn, or –... -
Page 19: After Sales Service
In the event of any faults which you can- not easily remedy, please contact: – Your Miele Dealer – Your nearest Miele Service Dept, (see address on the back page). When contacting the Service Depart- ment, please quote the Model and Ser-... -
Page 20: Electrical Connection And Technical Data
Electrical connection and Technical data Electrical connection and Technical data Important Electrical connection The wires in the mains lead are col- General notes oured in accordance with the following code: All electrical work should only be under- taken by a suitably competent person Green/yellow = earth in strict accordance with national and Blue... -
Page 21: Technical Data
Rated load If this machine or appliance is fitted – DA 206, DA 209, DA 216, with a non-rewireable plug, the follow- DA 217, DA 219 ... . 207 W ing information applies: –... -
Page 22: Appliance Dimensions
Appliance dimensions Appliance dimensions DA 206, DA 209 DA 217, DA 217 EXT = DA 206: 600; DA 209: 900 DA 216, DA 216 EXT DA 219, DA 219 EXT... -
Page 23: Installation
B and finally, if the height of the room requires it, by retaining plate C. [mm] [mm] [mm] 450 (Electric) DA 206 650 (Gas) DA 209 AUS: 600 (Electric, Gas) DA 216 450 (Electric) - Page 24 Installation Retaining plate A Retaining plate B Drill a hole 8 mm Ø above the worktop at a distance of Address the top retaining plate B s + 425 mm. flush to the room ceiling and mark the positions on the wall of the 4 Drill another hole 8 mm Ø...
-
Page 25: Vapour Guide/Canopy
(see the illustration in the section on fitting the retaining plates) DA 206, DA 216, DA 217: Drill a hole of 6 mm Ø in the middle Hang the vapour guide (canopy) on taking measurement w into account to the angle brackets of retaining and press an S6 plug into the hole. -
Page 26: Motor Unit
Installation Motor unit (only for appliances with an integrated fan) DA 206, DA 216, DA 217: Secure the vapour guide with two 4 x 30 mm screws and two 4.3 mm washers. DA 209, DA 219: Secure the vapour guide with two 4 x 30 mm screws and two 4.3 mm... -
Page 27: Control Unit
Installation Control unit Electrical Connection (only for EXT models) Important: After the vapour (canopy) guide and the motor unit or the control unit have been secured, the cooker hood must be connected to the electricity supply before the tower is fitted. First insert the 6 pole and the 15 pole connectors of the vapour guide into the corresponding couplings on... -
Page 28: Extraction Connection
Condensate traps are available from the Miele Spare Parts Department. When installing a condensate trap ensure that it is positioned vertically and if possible directly above the exhaust connection. -
Page 29: Recirculation Connection
Active charcoal filters are available from the Miele Spare Parts Depart- ment or some Miele dealers. Set the operating hours counter for the active charcoal filter (see section on Altering the filter operating hours... - Page 30 Installation Extraction Recirculation [mm] [mm] [mm] [mm] 1020 1110 DA 206 1020 1110 DA 209 1025 DA 216, DA 216 EXT 1035 DA 217, DA 217 EXT 1055 DA 219, DA 219 EXT A = minimum total height for cooker hood...
- Page 31 Installation For recirculation make sure that the openings in the extension piece are po- sitioned at the same height as the air outlets in the directional unit of the fan motor. Screw the extension piece firmly to the upper retaining plate at each side with two screws 3.9 x 7.5 mm.
-
Page 32: Fitting The Tower
Installation Fitting the tower Fold each protective sheet at the top. Remove the protective foil round the sticking points. Stick the protective sheet to the ex- tension piece so that it is smooth at the sides and flush at the bottom. DA 216, DA 217, DA 219 only: A protective cardboard sheet prevents Hold the main shaft gently apart and... -
Page 33: Connection For Air Extraction
Connection for air extraction Connection for air extraction – If the exhaust air is to be ducted into Danger of toxic fumes. the open air the installation of a tele- Please heed the “Warning and scopic wall vent is recommended. Safety instructions”... -
Page 34: Connection To An External Fan
Connection to an external fan Connection to an external fan EXT model cooker hoods are designed for use with an external fan, i.e. the fan is fitted outside the room in a position of your choice. Electrical connection is made via a con- necting lead with plug and coupling. - Page 36 Alteration rights reserved / 44 / 000 GB/AUS/NZ - 2798 This paper consists of cellulose which has been bleached without the use of chlorine.