Table of Contents
Related Manuals for Miele DA 2818
Summary of Contents for Miele DA 2818
- Page 1 Operating and Installation Instructions Ventilation Hood To prevent accidents and damage to the appliance, you must read these instructions before installing the appliance and using it for the first time. en-US M.-Nr. 11 851 220...
-
Page 2: Table Of Contents
Description of functions ................... 16 Before using for the first time ................17 Selecting extraction mode or recirculation mode..........17 Setting up Miele@home ..................17 Connecting via the app .................. 18 Connecting via WPS ..................19 Signing out of WiFi (reset to factory settings) ..........20 Setting up Con@ctivity .................. - Page 3 Contents OdorFree Charcoal Filter ..................38 Resetting the filter saturation indicator for the charcoal filters....... 38 Disposing of charcoal filters ................39 Service and warranty ..................40 Location of the data plate ................... 40 MieleCare ......................40 Installation......................41 Before installation....................41 Installation Instructions ..................
-
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS This appliance complies with current safety requirements. Improper use of the appliance can lead to personal injury and material damage. Read all instructions before installing or using the appliance for the first time. Only use the appliance for its intended purpose. Keep these operating instructions in a safe place and pass them on to any future user. - Page 5 Unauthorized installation, maintenance, and repairs can cause considerable danger for the user. Installation, maintenance, and repairs must only be carried out by a Miele authorized technician. A damaged ventilation hood can be dangerous. Always check for visible signs of damage. Never use a damaged ventilation hood.
- Page 6 IMPORTANT SAFETY INSTRUCTIONS Be certain your appliance is properly installed and grounded by a qualified technician. To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding system. It is imperative that this basic safety requirement be met.
- Page 7 IMPORTANT SAFETY INSTRUCTIONS Defective components should be replaced by Miele original parts only. Only with these parts can safety of the appliance be assured as intended by the manufacturer. If the power cord is damaged, it must only be replaced by a qualified service technician.
- Page 8 IMPORTANT SAFETY INSTRUCTIONS Correct use WARNING: TO REDUCE THE RISK OF A COOKTOP GREASE FIRE: - a) Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers may ignite. Heat oils slowly on low or medium settings. - b) Always turn the hood on when cooking at a high heat.
- Page 9 IMPORTANT SAFETY INSTRUCTIONS – 4) You can fight the fire with your back to an exit. *Based on “Kitchen Fire Safety Tips” published by NFPA. The ventilation hood may become damaged if exposed to excessive heat from a gas cooktop. - When using the ventilation hood over a gas cooktop, ensure that any burners in use are always covered by cookware.
- Page 10 IMPORTANT SAFETY INSTRUCTIONS Proper installation WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: - a) Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.
- Page 11 Never use a steam cleaner to clean the ventilation hood. The steam can reach the electrical components and cause a short circuit. Accessories Use only genuine original Miele parts. If parts or accessories from other manufacturers are used, the warranty may become void.
- Page 12 IMPORTANT SAFETY INSTRUCTIONS FCC Declaration of Conformity These devices comply with FCC Rules Part 15. This equipment has been tested and found to be in compliance with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules of Operation and is subject to the following conditions: These devices may not cause harmful interference.
-
Page 13: Caring For The Environment
Consult with local authorities, dealers or Miele in order to dispose of and recycle electrical and electronic appliances. Miele assumes no responsibility for deleting any personal data left on the appliance being disposed. -
Page 14: Guide To The Appliance
Guide to the appliance... - Page 15 Guide to the appliance a Exhaust connection Extraction ducting can be directed upward, to the rear, or to the left-hand side. b Overhead lighting c Grease filter d Edge extraction panel e Controls f Control for switching the lighting on and off and for dimming the lighting g Control for switching the blower on and off h Controls for setting the blower power i Control for the delayed shutdown function...
-
Page 16: Description Of Functions
Description of functions The following functions are available on Recirculation mode your ventilation hood, depending on the (DUU 2900-900 conversion kit required) model: The air is drawn in via the edge Extraction mode extraction panel and cleaned by the grease filters. The air is then directed into the recirculation box, where it is also cleaned by the charcoal filters. -
Page 17: Before Using For The First Time
Switch off the blower and the lighting. You can connect to the household WiFi Press the control and the network via the Miele app or via WPS. operating-hours control at the same time. Please note that you cannot set up a WiFi connection at the same time as a The charcoal filter symbol ... -
Page 18: Connecting Via The App
Before using for the first time Switch the ventilation hood off. Connecting via the app The Miele app can be used to connect to your network. Install the Miele app on your mobile Press and hold the control. -
Page 19: Connecting Via Wps
Repeat the steps above. Tip: If your WiFi router does not support WPS, please connect via the Miele app. Press the control on the ventilation hood after a few seconds. After a short while, 2 will light up constantly, and 3 and B will flash on and off. -
Page 20: Signing Out Of Wifi (Reset To Factory Settings)
Before using for the first time Signing out of WiFi (reset to factory settings) Touch the control. To set up a new WiFi connection, the existing WiFi connection must be disconnected. Switch the ventilation hood off. 2 will light up constantly, 3 will flash on and off. -
Page 21: Setting Up Con@Ctivity
Setting up Con@ctivity connection (Con@ctivity 2.0) Con@ctivity is the direct communication system between an induction Miele Required: cooktop and a Miele ventilation hood. It - Con@ctivity 2.0 enabled Miele enables the ventilation hood to operate induction cooktop automatically depending on the operational state of a Miele cooktop with onset controls. - Page 22 Before using for the first time Installing the Con@ctivity 2.0 stick Activating the ventilation hood See the relevant installation The cooktop and ventilation hood instructions provided with the must be switched off. Con@ctivity 2.0 stick. Activating the wireless connection ...
- Page 23 Before using for the first time Finishing activation on the ventilation hood To activate Con@ctivity 2.0, press the control. When successfully connected, B will go out, and 2 and 3 will light up constantly. 2 will light up constantly, 3 will flash on and off.
- Page 24 Before using for the first time Activation failed If a wireless connection cannot be Press the control to deactivate established despite activation of the Con@ctivity function on the ventilation Con@ctivity 2.0. hood and cooktop, the function must first be deactivated and then reactivated on both appliances.
-
Page 25: Operation (Automatic Mode)
Operation (Automatic mode) When Con@ctivity is active, the ventilation hood always operates in automatic mode (see “Before using for the first time – Setting up Con@ctivity”). If you wish to operate the ventilation hood manually; see “Operation (Manual mode) – Cooking without Examples for power levels 1 to B Con@ctivity”. -
Page 26: Cooking Process
Operation (Automatic mode) Cooking process Switching off For example, you switch on a burner Turn off all burners. at the highest power level to heat Over the next few minutes, the cookware for frying. After approx. ventilation hood blower setting will 10 seconds to 4 minutes, you then decrease one level at a time until the reduce the power level (60 seconds... -
Page 27: Temporarily Exiting Automatic Mode
Operation (Automatic mode) You can also operate the ventilation Temporarily exiting Automatic hood manually for a complete cooking mode process. To temporarily exit Automatic mode To do so, switch the ventilation hood when cooking: blower on before the cooktop. ... -
Page 28: Operation (Manual Mode)
Operation (Manual mode) Cooking without Con@ctivity Selecting the delayed (Manual mode) shutdown time The ventilation hood can be operated It is advisable to run the blower for a manually if: few minutes after cooking has finished. This helps to neutralize any lingering - The Con@ctivity function is not vapors and odors in the air. -
Page 29: Dimming/Switching The Overhead Lighting On/Off
Operation (Manual mode) Dimming/switching the Power management overhead lighting on/off The ventilation hood is equipped with a power management system. Power The overhead lighting can be switched management helps to save energy. It on and off and dimmed independently ensures that the blower power level is of the blower. -
Page 30: Safety Shut-Off
Operation (Manual mode) Activating/deactivating power Safety shut-off management If power management has been Switch off the blower and the lighting. deactivated, the ventilation hood will switch itself off automatically after Press the delayed shutdown 12 hours if it has been left on (blower control ... -
Page 31: Operation (Automatic And Manual Modes)
Operation (Automatic and Manual modes) Switch off the blower and the lighting. Filter saturation indicator Press the delayed shutdown The ventilation hood registers the length control and the filter saturation of time it has been operated. control at the same time. The filter saturation indicators show The grease filter symbol ... -
Page 32: Adjusting Or Deactivating The Filter Saturation Indicator For The Charcoal Filter
Operation (Automatic and Manual modes) Adjusting or deactivating the filter Checking the filter saturation saturation indicator for the charcoal indicator filter Before the set operating time has run Charcoal filters are needed for out, you can check what percentage of recirculation mode. -
Page 33: Energy-Saving Tips
Energy-saving tips This hood operates in a very efficient - Use the Con@ctivity function. The and energy-saving manner. The ventilation hood will switch on and off following will help you to save even automatically. The ventilation hood more energy when using it: will select the optimum power level for the cooking you are doing, which - Ensure that there is sufficient... -
Page 34: Cleaning And Care
To prevent the surfaces from quickly becoming dirty again, we recommend Unsuitable cleaning agents can treating them with a stainless steel care damage the surfaces and control product (available from Miele). elements. Do not use any cleaning agents containing soda, acid, chloride, or solvent. -
Page 35: Grease Filters And Edge Extraction Panel
Cleaning and care Important information for the Grease filters and edge controls extraction panel If soiling is not removed promptly, it Risk of fire could cause the control elements to Oversaturated grease filters are a fire alter or discolor. hazard. - Page 36 Cleaning and care Removing the panel and grease filters The panel and grease filter can fall out when you are handling them. This can result in damage. Make sure you hold the panel and the grease filter securely at all times when handling them.
- Page 37 Ensure the spray arm is not obstructed. Use a commonly available household dishwashing detergent. In a Miele dishwasher use the If the filters have been installed “Normal” program. incorrectly, you can insert a small screwdriver into the slit to disengage Depending on the detergent used, the locking clip.
-
Page 38: Odorfree Charcoal Filter
Cleaning and care Resetting the filter saturation indicator for the grease filters Once cleaning is complete, the filter saturation indicator must be reset. While the blower is turned on, press the filter saturation indicator for approx. 3 seconds until 1 is the only indicator flashing. -
Page 39: Disposing Of Charcoal Filters
Cleaning and care To do this, press the filter saturation indicator twice with the blower turned on and hold it for approx. 3 seconds until 1 is the only indicator flashing. The charcoal filter symbol will go out. If you want to replace the charcoal filters before the full operating time elapses: ... -
Page 40: Service And Warranty
Miele This service is available in USA only. dealer or Miele Technical Service. MieleCare, our Extended Service The telephone number for Miele is listed Contract program, gives you the at the back of these instructions. assurance of knowing that your... -
Page 41: Installation
*INSTALLATION* Installation Before installation Before installing the appliance, read all of the information contained in this chapter and also in the “IMPORTANT SAFETY INSTRUCTIONS” section. Installation Instructions Please refer to the accompanying installation sheet for instructions on how to install the appliance. Leave these instructions with the appliance for the consumer/user. -
Page 42: Installation Parts
*INSTALLATION* Installation Installation parts... - Page 43 1 vent connection for exhaust Keep the following in a safe place: ducting 6" (150 mm). b 1 reducing collar for exhaust ducting 5" (125 mm). c Miele DUU 2900-900 conversion kit for recirculation mode (not Installation plan supplied, see “Technical data” for part number to order).
-
Page 44: Appliance Dimensions
*INSTALLATION* Installation Appliance dimensions... -
Page 45: Distance Between Cooktop And Ventilation Hood (S)
Provided a larger distance is not given by the manufacturer of the cooktop, follow the minimum safety distances between a cooktop and the bottom of the hood. Please also observe the information contained in the “IMPORTANT SAFETY INSTRUCTIONS” section. Minimum distance S Cooking appliance Miele Non-Miele appliance appliance Electric Cooktops 24" (610 mm) Electric Barbeques and Fryers 26"... -
Page 46: Installation Recommendations
*INSTALLATION* Installation Installation recommendations - We recommend a minimum distance of 27 ⁹/₁₆" (700 mm) and a maximum distance of 51 ³/₁₆" (1,300 mm). - Please note that the greater the distance from the cooktop, the less effective the hood is at drawing in the cooking vapors. -
Page 47: Air Venting
Air venting - Ensure that all connections are WARNING: Danger of toxic fumes. strong and airtight. Gas cooking appliances release carbon monoxide that can be - If the ducting has flaps, these must harmful or fatal if inhaled. be opened whenever the ventilation To reduce the risk of fire and to hood is switched on. -
Page 48: Reducing Collar
Reducing Collar exhaust ducting will need to be (optional accessory) suitably insulated. Miele will not accept warranty claims for any functional defects or damage caused by inadequate ducting. If you would like to reduce the environmental impact of your ventilation system by limiting the CFM output the Reducing Collar can be installed. -
Page 49: Electrical Connection
CSA C22.1-12, please consult a licensed electrician Canadian Electrical Code, Part I. or call Miele’s Technical Service Department. WARNING: THIS APPLIANCE MUST BE GROUNDED... -
Page 50: Technical Data
Technical data Blower motor 350 W Overhead lighting 4 x 3 W Total connected load 362 W Supply voltage, frequency 120 V AC, 60 Hz Fuse 15 A Power cord length 2.5 ft (0.75 m) Weight 46.2 lbs (21 kg) WiFi module Frequency range 2.400–2.4835 GHz Maximum transmission power < 100 mW ZigBee® module Frequency band 2.405–2.48 GHz Maximum transmission power <... - Page 51 Customer Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Headquarters and Miele Centre Princeton, NJ 08540 161 Four Valley Drive www.mieleusa.com Vaughan, ON L4K 4V8 www.miele.ca Customer Support Phone: 888-99-MIELE (64353) Customer Care Centre info@mieleusa.com...
- Page 52 DA 2818 en-US M.-Nr. 11 851 220 / 00...