Table of Contents
Advertisement
Main Menu
(continued)
INPUT SELECT
Sub menu
Settings
VIDEO / Y/C
<AUTO>
<NTSC>
<PAL>
NTSC SETUP
<75>
<00>
YP
P
/RGB
<YP
B
R
<RGB-VIDEO>
<RGB-COMP.>
COMPONENT
<SMPTE>
LEVEL
<B75>
<B00>
RGB SYNC
<G-ON>
<EXT>
COMP.
*1 "AUTO" is set when the monitor is shipped from the factory, but if there are concerns about noise etc. from outside the
input signal, we recommend assigning specific format.
■ COMP.
The following menus are switched by selecting "RGB-COMP." in "YP
Sub menu
Settings
AUTOSETUP *1
H POSITION
<0–60>
(Factory preset settings: 30)
V POSITION
<0–60>
(Factory preset settings: 30)
PHASE
<0–31>
(Factory preset settings:
CLOCK
<700–1800>
(Factory preset settings:
WXGA/XGA
<XGA>
<WXGA>
*1 "EXECUTING" is displayed while "AUTOSETUP" is being executed, and "COMPLETE" is displayed when
"AUTOSETUP" is completed.
If "AUTOSETUP" cannot be completed, "INCOMPLETE" is displayed.
*2 Each "RGB-COMP." input compatible format can be adjusted, but you cannot load ("SETUP LOAD"
or save ("SETUP SAVE"
22
Explanation
Used to select the input format for VIDEO and Y/C input.
<AUTO>
<NTSC>
Selects the NTSC setup level.
<75>
<00>
P
>
Selects either YP
B
R
<YP
B
<RGB-VIDEO>Selects the video RGB signal.
<RGB-COMP .>Selects the PC RGB signal.
Selects YP
<SMPTE>
<B75>
<B00>
Selects the SYNC when using RGB-VIDEO input.
<G-ON>
<EXT>
Performs analog PC settings. (Refer to "COMP." below)
page 23)
page 23)
page 19) the user data
The underlined values are factory preset setting values.
Either NTSC or PAL is automatically selected.
NTSC
Select this when using with a setup signal of 7.5 IRE.
(The inner parts of the monitor are set to the 7.5 IRE
setup level to suit the black level)
Select this when there is no setup level signal.
P
(Component) or RGB input mode.
B
R
P
>
Selects the YP
R
P
(Component) signal input level.
B
R
When the signal level specified in SMPTE is Chroma
100 IRE P
, P
B
Select this when connecting a betacam or simliar
devices set to 7.5 IRE. (The inner parts of the monitor
are set at 7.5 IRE setup level to suit the black level)
Select this when connecting a betacam or similar devices
that are not setup to the IRE level.
Select when a synchronizing signal is superimposed on
the G signal.
Select when an external synchronizing signal is
received in synchronization.
P
B
R
The underlined values are factory preset setting values.
Explanation
Screen automatic adjustment is performed when "RGB-
COMP." is selected in "YP
menu. "AUTOSETUP" is performed if a different screen is
displayed, and "YES" is selected.
Used to adjust the picture display position in the horizontal
*2
direction.
Used to adjust the picture display position in the vertical
*2
direction.
Used to adjust the clock phase with 1/32 clock phases.
Used to adjust the sampling clock in dot units.
Switches between WXGA and XGA.
<PAL>
PAL
P
signal.
B
R
= 0.7 Vp-p.
R
/RGB" in the "INPUT SELECT" menu.
P
/RGB" in the "INPUT SELECT"
B
R
*1
*2
*2
page 19)
Advertisement
Table of Contents
