Trigger Setup; Motion Detection Setup; I/O Status - COMPRO TN65 User Manual

Compro TN65/TN65W Network Camera
go ahead to sign up to the "Clickatell Central (API)" service and follow Clickatell's online instructions to
obtain an API ID.
3. Choose [Next] to save the setting.
4. Customize the SMS message content if wanted. Choose [Next].
5. To receive a test message, click on [Send me a SMS message to the SMS Gateway]. Or choose [Finish]
to save the configuration.
6. To enable SMS notification, go to [Setup] > [Event Setup], and click on [Trigger Setup] to create a new
event trigger or modify an existing one. Then under [Event Actions], check [Send SMS] and choose
[Finish]. Note that you must have enough credit at Clickatell in order to send SMS message.

Trigger Setup

You can create, modify, or delete event triggers and set the trigger mechanism to be by Schedule, Motion
Detection, etc. When creating an event trigger by schedule, you can set up scheduled time and period. When
setting event trigger as by Motion Detection, you can select the trigger area defined in the Motion Detection
setting. After finishing event trigger setup, click [Next] to select event actions so your camera will take
snapshots, send e-mails, or upload images to your FTP server.

Motion Detection Setup

Motion detection feature provides a selection of 3 regions for motion detection. You can directly click and
drag on the preview screen to set a detection region. Prior to that, please select the region (0, 1 or 2 ) and the
sensitivity level (S1: Lowest, S2: Low, S3: Medium, S4: High, S5: Highest) from their drop down list. Press [Save]
button for the settings to take effect. If you like to remove an existing region, please select the region number
and click [Delete] to delete it.

I/O Status

Here displays the status of your I/O port for your reference.
6-10 Event Setup
Figure 6-10. Motion detection
Sensitivity Level
Region Number