Using the voice command
Your Headset can control your Handset using your voice though it only
recognise English commands.
1.
Press the Voice button to activate the voice command.
•
To use the voice command feature, ensure that the voice prompt is on.
See page 15. By default, the voice prompt is on.
2.
Wait until the headset ask you to "
•
If you don't say any command within 5 seconds, you will hear, "
To reactivate the voice command, press the Voice button.
3.
Say one of the following commands loudly and clearly.
Command
"Pair Active"
"Pair Normal"
"Connection Status"
"Redial"
Say a command".
Action
Enter Active pairing mode.
Enter Normal pairing mode.
Find out if the headset is connected to a device
or not.
Redial the latest number you called on the
currently connected primary phone.
Cancelled".
13