Table of Contents
Advertisement
2.
Disconnect the WLAN antenna cables (2) from the terminals on the WLAN module.
NOTE:
WLAN antenna cable labeled "2/AUX" connects to the WLAN module "Aux" terminal.
3.
Remove the four Phillips PM2.5×5.7 screws that secure the display assembly to the keyboard/top cover.
4.
Release the display hinges (1) by swinging them up and back.
54
Chapter 5 Removal and replacement procedures
The WLAN antenna cable labeled "1/MAIN" connects to the WLAN module "Main" terminal. The
Hide quick links:
Advertisement
Table of Contents
