Table of Contents
Advertisement
Description
Equipped with an Intel Core i3-6100U 2.30-GHz processor (2133-MHz FSB, 3.0-MB L3 cache, dual core,
15-W), an Intel HD Graphics 520 or Intel HD Graphics 510 graphics subsystem with UMA memory, and
a non-Windows operating system
Equipped with an Intel Pentium 4405U 2.10-GHz processor (2133-MHz FSB, 2.0-MB L3 cache, dual core,
15-W), an Intel HD Graphics 520 or Intel HD Graphics 510 graphics subsystem with UMA memory, and
a non-Windows operating system
Equipped with an Intel Core i3-6100U 2.30-GHz processor (2133-MHz FSB, 3.0-MB L3 cache, dual core,
15-W), an Intel HD Graphics 520 or Intel HD Graphics 510 graphics subsystem with UMA memory, and
a non-Windows operating system
Before removing the system board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
a.
Battery (see
Battery on page
b.
WLAN module (see
c.
Solid-state drive (see
d.
Fan (see
Fan on page
NOTE:
When replacing the system board, be sure that the Memory module (see
on page
36) is removed from the defective system board and installed on the replacement system board:
Remove the system board:
1.
Disconnect the following cables from the system board:
(1) Display panel ZIF connector cable
(2) Hard drive ZIF connector cable
(3) TouchPad ZIF connector cable
(4) Keyboard ZIF connector cable
(5) Keyboard backlight ZIF connector cable
(6) RTC battery cable
(7) Card reader board ZIF connector cable
(8) Speaker cable
Bottom cover on page
33)
WLAN module on page
37)
Solid-state drive on page
43)
31), and then remove the following components:
42)
Memory module
Component replacement procedures
Spare part number
855831-001
855832-001
855832-001
45
Hide quick links:
Advertisement
Table of Contents
