Table of Contents
Advertisement
Soft-Off by PWRBTN (Instant Off)
Under ACPI (Advanced Configuration and Power management Interface) you can create a
software power down. In a software power down, the system can be resumed by Wake Up
Alarms. This item lets you install a software power down that is controlled by the power
button on your system. If the item is set to Instant-Off, then the power button causes a
software power down. If the item is set to Delay 4 Sec. then you have to hold the power
button down for four seconds to cause a software power down.
PWRON After PWR-Fail (Off)
This item enables your computer to automatically restart or return to its operating status.
Resume Event Control (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
RTC Alarm Resume
X
Date (of Month) Alarm
X
Time (hh:mm:ss) Alarm
: Move Enter: Select
F5:Previous Values
RTC Alarm Resume (Disabled)
When set to Enabled, additional fields become available and you can set the date (day of
the month), hour, minute and second to turn on your system. When set to 0 (zero) for
the day of the month, the alarm will power on your system every day at the specified
time.
•
Date of Month: Use this item to define the date of month when using the RTC
alarm to resume the system.
•
Resume Time: Use this item to define the time when using the RTC alarm to
resume the system.
Press <Esc> to return to Power Management page.
Phoenix-AwardBIOS CMOS Setup Utility
Resume Event Control
[Disabled]
0
0 0 0
+/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F6:Fail-Safe Defaults
Using BIOS
Item Help
Menu Level
F7:Optimized Defaults
41
Advertisement
Table of Contents
