Table of Contents
Advertisement
38
IDE Primary/Secondary Master/Slave PIO (Auto)
Each IDE channel supports a master device and a slave device. These four items let you
assign the kind of PIO (Programmed Input/Output) was used by the IDE devices. Choose
Auto to let the system auto detect which PIO mode is best, or select a PIO mode from 0-
4.
Primary/Secondary Master/Slave UDMA (Auto)
Each IDE channel supports a master device and a slave device. This motherboard
supports UltraDMA technology, which provides faster access to IDE devices.
If you install a device that supports UltraDMA, change the appropriate item on this list
to Auto. You may have to install the UltraDMA driver supplied with this motherboard in
order to use an UltraDMA device.
IDE HDD Block Mode (Enabled)
Enable this field if your IDE hard drive supports block mode. Block mode enables BIOS
to automatically detect the optimal number of block read and writes per sector that the
drive can support. It also improves the speed of access to IDE devices.
Press <Esc> to return to the Integrated Peripherals page.
South OnChip PCI Device (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Onboard Azalia AUDIO (Auto)
This option allows you to control the onboard Azalia audio. Disable this item if you are
going to install a PCI audio add-on card.
Onboard PCI LAN (Enabled)
This option allows you to control the onboard LAN device.
Onboard LAN Boot ROM (Disabled)
Use this item to enable and disable the booting from the onboard LAN or a network add-
in card with a remote boot ROM installed.
Onboard SATA Controller (Both)
This item allows you to manually specify the onboard Serial ATA controller.
Onboard SATA Type (IDE Mode)
This item allows you to manually specify the onboard Serial ATA Type.
USB 2.0 Supports (Enabled)
Enable this item if your system supports USB 2.0.
Phoenix-AwardBIOS CMOS Setup Utility
Onboard Azalia Audio
Onboard PCI LAN
Onboard Lan Boot ROM
Onboard SATA Controller
Onborad SATA Type
USB 2.0 Supports
USB Controller
X
USB Legacy Support
X
USB Mouse Support
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values
F6:Fail-Safe Defaults
South OnChip PCI Device
[Auto]
[Enabled]
[Disabled]
[Both]
[IDE Mode]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
F7:Optimized Defaults
Using BIOS
Item Help
Menu Level
Advertisement
Table of Contents
