Table of Contents
Advertisement
Follow these instructions to install an add-on card:
1
Open the chassis and then remove the slot bracket from the case where you
will be installing the expansion cards.
2
Install your graphics card in the proper slot by pressing the card firmly into the
slot.
3
Drive in the screw to secure the slot bracket of the expansion card.
4
Replace your computer's chassis cover.
5
Power on the computer, if necessary, set up BIOS utility of expansion card
from BIOS.
6
Install related driver to complete the installation.
Installing one graphics card
With one PCI Express Graphics card, install it into PCIEX16_1 slot,
and insert the "SHUNT CARD" into the PCIEX16_2 slot. With two PCI
Express Graphics cards, set them up onto PCIEX16_1 and
PCIEX16_2 slots, and then plug in the external cable to unite the
multi-GPU for CrossFire
Please go to Chapter 5 to see detail information for CrossFire
technology.
TM
mode.
Installing the Motherboard
Installing two graphics cards
21
TM
Advertisement
Table of Contents
