Bosch Evolution 300 Series Service Manual page 44

6HUYLFLQJ WKH 'RRU
Photo $
To service or replace the door components remove the door as
previously described and place the door on a protected work surface
with the handle down and hanging off the edge.
Begin disassembly by loosening the two screws ZKLFK secure the handle
to the door assembly (Shoto $). The screws will remain captive in the
door assembly while the handle is lowered from below.
Photo %
Remove the four screws located along the bottom edge of the door
(Shoto %). The porcelain door liner assembly with hinges and inner glass
attached can now be lifted away from the outer door panel.
With the door liner assembly removed the outer door panel and outer
Photo &
glass are accessible (Shoto &)
When replacing the outer door glass ensure that the foil tape is attached
around the window opening as seen in the photo.
2:31