Routing The Connecting Cables - Viessmann VITODENS 200-W Installation And Service Instructions Manual

Electrical connections

Routing the connecting cables

!
Please note
If connecting cables touch hot components they
will be damaged.
Route and attach the power cables on site in
such a way that the maximum permissible tem-
peratures of the cables are not exceeded.
5
Fig.15
A LV terminals
230 V terminals
B
Internal extension
C
Main PCB
D
Remove the existing cable grommet when using
cables with a larger cross-section (up to
Secure the cable with cable grommet
into the casing base (black).
(cont.)
14 mm).
7
integrated
F
E Communication module
Cable grommet for power cable
F
Plugs for connecting the cylinder temperature sen-
%
sor to the cable harness
Installation sequence
23