Set Up The Repeater - Uniden Elite 9145 Owner's Manual

Elite 9145 series
Table of Contents

Advertisement

Set Up the Repeater

The repeater is not a telephone; it must be registered to a phone base
before using.
Any repeaters that came packaged with a base are already registered
to that base for you.
For instructions on registering repeaters to the base, see page 37.
How it Works
The repeater extends
the range of your base in
all directions, including
up and down. Cordless
handsets automatically
connect to the repeater
or the base, depending
on which signal is stronger.
You can roam anywhere within range
of the base or the repeater(s) and make
and receive calls as usual from your handsets.
Handsets op
erate exactly the same no matter which unit they connect
to.
Usually, you can't tell when a handset switches between the base and
the repeater in the middle of a call.
Your base supports a total of 6 repeaters, including any that were
supplied with your phone.
Repeaters can be up to 3 chain-links (maximum) from the base.
8
Elite9145om_20110115.indd 8
Hand-o area
Repeater
Handsets in this
area can connect
to either unit.
Extended coverage area
The repeater has a
stronger signal; handsets
in this area connect to the
Base coverage area
The base signal is
strongest; handsets
in this area connect
to the base.
Base
Hand-o
area
repeater
1
2
3
4
5
6
7
8
9
0
#
28/9/11 12:14:29 PM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents