Installing Mig Wire Spool And Adjusting Hub Tension - Miller MILLERMATIC DVI Owner's Manual

4-9. Installing MIG Wire Spool and Adjusting Hub Tension

Installing 1 Or 2 lb Wire Spool
Spindle
Remove these
components
from spindle.
Tools Needed:
OM-1330 Page 14
Use compression spring
with 8 in (200 mm) spools.
Spindle
Order extra spring
Part No. 186 437
15/16 in
When a slight force is needed
to turn spool, tension is set.
To install either a 1 lb or 2 lb wire
spool, follow the procedure as
shown in the illustration.
Install these
components
onto spindle.
072573-B / 802 922