Exhaust System - Mercedes-Benz 212 Sedan E-Class Service Manual

Extraction device, exhaust funnel with internal clamping
Use Exhaust socket for vehicles with tail pipe
finishers integrated in the bumper and
vehicles with straight exhaust tail pipes.
Manufacturer Nederman Ph. & Co AB (S)
Sysdhamnsgatan 2
S-25228 Helsingborg
www.nedermann.se
Nederman GmbH (D)
Kelterstrasse 65
D-72669 Unterensingen
www.nederman.de
Order number 20867261
i Note on the extraction devices
The clamp operates inside the tailpipe of the exhaust system. Exhaust sockets can be ordered from the
manufacturers listed from mid-January 2009.
Information on the socket and ordering addresses are published in GOTIS under:
Chapter U, Design Group 00.21, Topic 03.1
– This printout will not be recorded by the update service. Status: 01 / 2009 –
i Note
GOTIS address on the internet:
http: / / gotis.aftersales.mercedes-benz.com
Introduction of the New E-Class, Model Series 212 Sedan

Exhaust system

P58.40-2086-00
b
145