Table of Contents
Advertisement
It is possible to continue driving after the hood has
been triggered in order to have it reset at a qualified
workshop. If the hood release handle is pulled, the
hood must be reset before the vehicle can be driven
further. When the ignition is on, the multifunction
display in the instrument cluster shows a symbol indi-
cating that the engine hood is open.
Symbol "Engine hood open"
Block diagram of main components of the
crash-active engine hood
– This printout will not be recorded by the update service. Status: 01 / 2009 –
i Note
The hood clamping lever must be disconnected
before the hood is moved to the vertical position,
and reconnected before the hood is closed.
The correct procedure for restoring the engine
hood to its original position after triggering while
avoiding all risk of accident and injury, and when it
is possible to continue driving with the hood in the
triggered position, are described in the owner's
manual.
Interactive owner's manual in the internet at:
www.mercedes-benz.de / betriebsanleitung
P54.32-7545-00
B151 / 1
Left front bumper pedestrian protection sensor
B151 / 2
Center front bumper pedestrian protection
sensor
B151 / 3
Right front bumper pedestrian protection
sensor
N2 / 10
Supplemental restraint system control unit
S62 / 42
Right engine hood contact switch
S62 / 43
Left engine hood contact switch
Y127 / 1
Left rear engine hood lifter
Y127 / 2
Right rear engine hood lifter
CAN E
Chassis CAN
P91.60-3907-00
Introduction of the New E-Class, Model Series 212 Sedan
Passive safety
b
87
Hide quick links:
Advertisement
Table of Contents
