Body/Exhaust System - Mercedes-Benz 212 Sedan E-Class Service Manual

Body/exhaust system

Straightening and portal tool set
i Company-owned sales and service outlets in the Federal Republic of Germany are supplied by MBVD /
KP.
Article CELETTE straightening and portal tool set
Order number 7212.500 (straightening tool set)
Source in
Germany
Source outside
Germany
i Note on exhaust systems
Depending on the engine variant, vehicles of model series 212 and future model series feature exhaust tail
pipe finishers integrated in the bumper. Proper extraction of exhaust gases at the vehicle requires a special
adapter for existing extraction systems in the workshop.
Extraction device, socket with internal clamping
Manufacturer NORFI Absaugtechnik GmbH
Order number 25-4950-103
144
Introduction of the New E-Class, Model Series 212 Sedan
b
CELETTE
7212.800 (portal tool set)
CELETTE Vertriebs GmbH
Siemensstrasse 19
D-77694 Kehl-Sundheim
www.celette.de
CELETTE S.A.
13. Route de Bechevienne
BP9
F-38217 Vienne Cedex
France
Use Exhaust socket for vehicles with tail pipe
finishers integrated in the bumper and
vehicles with straight exhaust tail pipes.
Kelterstr. 65
D-72669 Unterensingen
www.norfi.de
– This printout will not be recorded by the update service. Status: 01 / 2009 –
CAR BENCH
CAR BENCH straightening and portal tool
set
82466 (straightening tool set)
A7243600 / T (portal tool set)
HSK CAR BENCH
Karosseriegeräte-Vertriebs-GmbH
Am Fliegerhorst 3
D-63762 Grossostheim-Ringheim
www.carbench.de
CAR BENCH International S.p.A.
Via Dorsale 22
I-54100 Massa
Italy
P58.40-2087-00