Brother DCP-1608 User Manual page 34

Chapter 1
2.Fax (For MFC-1919NW) (continued)
Level 2 Level 3
2.Setup Send 1.Contrast
2.Fax
Resolution
3.Overseas
Mode
4.Auto Redial Set the machine to
The factory settings are shown in Bold with an asterisk.
26
Descriptions 1 Options
Changes the
Auto*
lightness or darkness
of faxes you send.
Light
Dark
Sets the default
Standard*
resolution for
outgoing faxes.
Fine
The quality of an
outgoing fax can be
improved by
changing the Fax
S.Fine
Resolution.
Photo
If you are having
On
difficulty sending a
fax overseas due to a
bad connection, then
turning on Overseas
Mode may help.
Off*
On*
redial the last fax
Off
number after five
minutes if the fax did
not go through
because the line was
busy.
Descriptions 2 Page
Auto will give the
best results. It
automatically
chooses a suitable
contrast for your
document.
If your document is
too light, choose
Light.
If your document is
too dark, choose
Dark.
Suitable for most
typed documents.
Good for small print
and transmits a little
slower than Standard
resolution.
Good for small print
or artwork and
transmits slower than
Fine resolution.
Use when the
document has
varying shades of
grey or is a
photograph. This has
the slowest
transmission time.
Turn this feature on if
you are having
difficulties sending
faxes overseas. This
feature will stay on for
the next fax only.
Keep this setting Off
when the network
connection is good
and you can send an
overseas fax
sucessfully.