Initial Setup - Brother DCP-1608 User Manual

Chapter 1

0.Initial Setup

0.Initial Setup (For MFC-1906 and MFC-1908)
Level 2 Level 3
1.Date&Time 1.Date&Time
—
2.Station ID
—
3.Tone/Pulse
—
4.Dial Tone
The factory settings are shown in Bold with an asterisk.
10
Descriptions 1 Options
Puts the date and
Year:
time on the LCD and
in headings of faxes
you send if you set up
the station ID.
Month:
Day:
Time:
Sets up your name
Fax:
and fax number to
appear on each page
you fax.
Tel:
Name:
Chooses the dialling
Tone*
mode.
Pulse
You can shorten the
Detection
dial tone detect
pause.
No Detection*
Descriptions 2 Page
Enter the last two
digits of the year.
(e.g.Enter 1, 3 for
2013.)
Enter the two digits
for the month.
(e.g.Enter 0, 1 for
January.)
Enter the two digits
for the day.
(e.g.Enter 0, 1 for
1st.)
Enter the time in 24-
hour format.
(e.g.Enter 1, 5, 2, 5
for 15:25.)
Enter your fax
number (up to 20
digits).
Enter your telephone
number (up to 20
digits). If your
telephone number
and fax number are
the same, enter the
same number again.
Enter your name (up 51
to 20 characters).
Your machine comes
set for Tone dialling
service.
If you have Pulse
dialling service
(rotary), you need to
change the dialling
mode.
Your machine will
dial as soon as it
detects a dial tone.
When you send a fax
automatically, by
default your machine
will wait for a fixed
amount of time
before it starts to dial
the number.
1