Replacing Fuse; Battery Care And Disposal - Razor Pocket Mod Owner's Manual

REPAIR AND MAINTENANCE
q Replacing Fuse
Turn power "OFF".
1
Lift up seat and unscrew 4
screws in storage compartment and
remove tray.
Amperage
number
4
Close fuse box. Replace seat/
storage compartment with 4
screws.
q Battery Care and Disposal
Do not store the battery in temperatures above 75° F (23.8° C) or below -10° F (-23.3° C).
CONTAINS SEALED NON-SPILLABLE LEAD ACID BATTERY. BATTERY MUST BE RECYCLED.
Disposal: Your Razor product uses sealed lead-acid batteries which must be recycled or disposed of in an
environmentally sound manner. Do not dispose of a lead-acid battery in a fire. The battery may explode or leak. Do not
dispose of a lead-acid battery in your regular household trash. The incineration, land filling or mixing of sealed lead-
acid batteries with household trash is prohibited by law in most areas. Return exhausted batteries to a federal or state
approved lead-acid battery recycler or a local seller of automotive batteries.
q Charger
The charger supplied with the Pocket Mod should be regularly examined for damage to cord, plug, enclosure and other
parts, and, in the event of such damage, product must not be charged until it has been repaired or replaced.
2
Locate fuse box on top of bat-
tery assembly. Open fuse cover to
expose fuse.
3
Remove fuse and replace with
new one of equal
amperage. Amperage rating is
located on top of fuse.
6 6
WARNING:
To prevent shock, please follow the
instructions accordingly and do not
skip or combine any steps.
WARNING: If a battery
leak develops, avoid contact with
the leaking acid and place the
damaged battery in a plastic bag.
Refer to the disposal instructions at
left. If acid comes into contact with
skin or eyes, flush with cool water
for at least 15 minutes and contact
a physician.