Storm Control - TP-Link TL-SG105E User Manual

Egress Rate(Kbps):
Note:
1. A port cannot enable both Storm Control and Ingress Rate Control at the same time.
2. When egress bandwidth control feature is enabled for one or more ports, you are suggested
to disable the flow control on each port to ensure the switch works normally.

8.3 Storm Control

Storm control function allows the switch to filter broadcast, multicast and UL frame in the network.
If the transmission rate of the chosen packets exceeds the set bandwidth, the packets will be
automatically discarded to avoid network broadcast storm.
On this page you can configure and view the storm control function information.
Choose the menu QoS→Storm Control to load the following page.
Here you can configure the port egress rate limit. If the rate for
sending packets on the port exceeds the set rate, the packets will
be discarded.
Figure 8-7 Storm Control Setting
37