User Account - TP-Link TL-SG105E User Manual

Choose the menu System→IP Setting to load the following page.
The following entries are displayed on this screen:
IP Address Setting

DHCP Setting:
IP Address:
Subnet Mask:
Default Gateway:
Note:
1. The switch only possesses an IP address. The IP address newly configured will replace the
original one.
2. Changing the IP address to a different IP segment will interrupt the network communication, so
please keep the new IP address in the same IP segment with the local network.

4.3 User Account

On this page you can modify the username and password in order to refuse illegal users.
Choose the menu System→User Account to load the following page.
Figure 4-2 IP Address Setting
Allows you to enable or disable the switch to serve as DHCP
client. If DHCP client is enabled, the switch will obtain the IP
address, subnet mask and default gateway from the DHCP server
automatically; otherwise, these three items should be configured
manually. By default, it is disabled.
Specify the system IP address of the switch. The default system IP
address is 192.168.0.1 and you can change it appropriate to your
needs. The switch IP address must be compliant with the subnet
layout.
Enter the subnet mask of the switch. Subnet mask is an address
code that determines the size of the network. By default, the
switch uses 255.255.255.0 as the subnet mask.
Enter the default gateway of the switch. Gateway serves as the
default destination where the packet is to be forwarded when its
destination IP address is not within the switch's subnet.
12