Switching module is used to configure the basic functions of the switch, including three submenus:
Port Setting, IGMP Snooping and Port Trunk.
5.1 Port Setting
On this page, you can configure and view the basic parameters of each port, including the port
status, speed, duplex mode and flow control. As the parameters will affect the working mode of the
port, please set the parameters appropriate to your needs.
Choose the menu Switching→Port Setting to load the following page.
The following entries are displayed on this screen:
Port Setting
Port:
Chapter 5 Switching
Figure 5-1 Port Setting
Select the desired port for configuration. It is multi-optional.
16