Bandwidth Control - TP-Link TL-SG105E User Manual

Priority Queue:

8.2 Bandwidth Control

Bandwidth control functions to control the ingress/egress traffic rate on each port via configuring
the available bandwidth of each port. In this way, the network bandwidth can be reasonably
distributed and utilized.
On this page you can configure and view the bandwidth control function information.
Choose the menu QoS→Bandwidth Control to load the following page.
The following entries are displayed on this screen:
Bandwidth Control Setting

Port:
Ingress Rate(Kbps):
Specify the priority queue the packets from the port are mapped
to. The priorities are labeled as 1~4 and among them the bigger
the value, the higher the priority.
Figure 8-6 Bandwidth Control Setting
Select the desired port for bandwidth control configuration. It is
multi-optional.
Here you can configure the port ingress rate limit. If the rate for
receiving packets on the port exceeds the set rate, the packets
will be discarded.
36