Cable Test - TP-Link TL-SG105E User Manual

The following entries are displayed on this screen:
Port Mirror

Port Mirror:
Mirroring Port:
Mirrored Port

Mirrored Port:
Ingress:
Egress:
Note:
1. The trunk member cannot be selected as the mirroring port.
2. A port cannot be set as the mirrored port and the mirroring port simultaneously.
3. The port mirror function can take effect span the multiple VLANs.

6.3 Cable Test

This switch provides cable test to diagnose the connection status of the cable connected to the
switch and the distance to the problem location, which facilitates you to locate and diagnose the
trouble spot of the network.
Choose the menu Monitoring→Cable Test to load the following page.
Allows you to enable or disable the port mirror feature of the
specified port.
Select a port from the pull-down list as the mirroring port.
Select a port from the pull-down list as the mirrored port to monitor
the traffic. Trunk member cannot be defined here. It is
multi-optional.
Select whether to monitor the ingress traffic. When the ingress is
enabled, the ingress traffic received by the mirrored port will be
copied to the mirroring port.
Select whether to monitor the egress traffic. When the egress is
enabled, the outgoing packets sent by the mirrored port will be
copied to the mirroring port.
22