802.1Q Vlan - TP-Link TL-SG105E User Manual

To ensure the normal communication of the factory switch, the default VLAN of all ports is set to
VLAN1. VLAN 1 cannot be deleted.
The following entries are displayed on this screen:
Port Based VLAN Configuration

Port Based VLAN
Configuration:
VLAN ID:
Port:
Member:
Note:
A VLAN cannot be the subset or superset of the other VLANs.

7.3 802.1Q VLAN

On this page you can configure 802.1Q VLAN feature and view the related settings.
Choose the menu VLAN→802.1Q VLAN to load the following page.
Enable or disable Port Based VLAN mode.
Enter the ID number of VLAN. It ranges from 2 to 32.
Displays the port number.
Click the check box to select the port of the VLAN. It is
multi-optional. If this field is checked, it indicates the port belongs
to the current VLAN.
28