Epson SC-S60600 Series User Manual page 14

SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
: The heater has reached the selected
temperature.
: The heater has not reached the selected
temperature.
C
Feed adjustment information during printing
This information is displayed when the adjustment
value is specified during printing.
"Correcting Banding" on page 51
U
D
Media info
❏
From left to right, this display shows the number for
the selected media, platen gap, media width, and
media remaining.
❏
The selected platen gap is shown as follows.
: 1.6
: 2.0
: 2.5
❏
The media remaining is not displayed if OFF is
selected for Length in the Media Remaining menu.
"Media Remaining" on page 93
U
E
Ink cartridge status
Displays the approximate level of remaining ink
and the current status. When ink runs low or an
error occurs, the display changes as shown below.
Normal
1 Status indicators
The ink cartridge status is indicated as follows.
: Ready to print. The height of the
indicator changes with the level of ink
remaining.
: Ink is low. You need to prepare a new
ink cartridge.
Introduction
Warning or error
14
: The level of ink remaining has
reached the limit. Replace the old ink
cartridge with a new one.
: The ink cartridge is not latched.
Lower the lock lever to engage the latch.
: No ink cartridge is inserted. Insert the
ink cartridge and lower the lock lever
to engage the latch.
: An error occurred. Check the message
on the screen, and clear the error.
: A Cleaning Cartridge is installed. The
height of the indicator changes with
the level of cleaning fluid remaining.
2 Ink color codes
SC-S80600 Series
OR : Orange
LK : Light Black
BK : Black
C : Cyan
M : Magenta
Y : Yellow
R : Red
LC : Light Cyan
LM : Light Magenta
WH : White
MS : Metallic Silver
CL : Cleaning cartridge
SC-S60600 Series/SC-S40600 Series
BK : Black
Y : Yellow