Assembly Instruction; Assembly Tools - Spirit 161171400 Owner's Manual

Table of Contents

ASSEMBLY INSTRUCTION

This manual is designed to help you easily assemble, adjust and use this machine. Please read this manual

carefully.

Set all parts in a clear area on the floor and remove the packing material. Refer to the parts list for help to

identify the parts.

It will take two people to assemble your unit.

PLEASE ENSURE ALL FASTENERS ARE TIGHT AFTER THE COMPONENTS HAVE BEEN ASSEMBLED

PRE-ASSEMBLY

Using a razor knife (Box Cutter), cut the banding straps that wraparound the carton, then cut around the

dotted line at the bottom of the box; lift the box over the unit and unpack.

Carefully remove all parts from carton and inspect for any damage or missing parts. If damaged parts

are found, or parts are missing, contact your dealer immediately.

Locate the hardware package. The hardware is separated into four steps. Remove the tools first.

Remove the hardware for each step as needed to avoid confusion. The numbers in the instructions that

are in parenthesis (#) are the item number from the assembly drawing for reference.

#107. Phillips Head Screw

#110. 5mm Allen Wrench

CUSTOMER SERVICE 1-888-707-1880

OR EMAIL CUSTOMERSERVICE@PINCOFFS.CA

#108. 8mm Allen Wrench

#111. 13/14mm Wrench

#109. 17mm Wrench

#116. 6mm Allen Wrench

Table of Contents