Handle Bar Assembly - Spirit XE520s Service Manual

Model XE520s
Part

2. Handle Bar Assembly

Procedures：
1. Use Phillips Head Screw Driver
to release three 3.5x12mm Sheet
Metal Screws which secure
Handle Bar Covers, as shown in
figure 1.
2. Release further two M5x15mm
Phillips Head Screws which
secure Connecting Arm Covers,
as shown in figure 2.
3. Use 12m/m_Wrench and
13m/m_Wrench to release 5/16"
× 1-1/4"_Hex Head Bolt,
5/16 x20x1.5 T flat washer and
"
5/16 x7T nut which secure
"
Connecting Arm and fish-eye
bearing, as shown in figure 3.
4. Use 12m/m_Wrench to release
5/16" × 15m/m_Hex Head Bolt
and 5/16 x23x1.5T washer which
"
secure the Handle Bar, as shown
in figure 4.
Service Replacing Parts
5
Rev.
1
2
3
4