Information; Other Settings; Remote Control Settings - Marantz SR6005 User Manual

ENGLISH DEUTSCH

Information

Show information about receiver settings, input signals, etc.
Items
n MAIN ZONE
Status
Show information about
This item shows information about settings for MAIN ZONE.
current settings.
The information displayed differs according to the input source.
Select Source / Name / Surround Mode / Input Mode /
Decode Mode / HDMI / Digital / Component / Video Select /
Video Mode / Content Type / Video Convert / i/p Scaler /
Resolution / Progressive Mode / Aspect etc.
n ZONE2
This item shows information about settings for ZONE2.
Power / Select Source / Volume Level
Surround Mode : The currently set surround mode.
Audio Input Signal
Show information about Signal : The input signal type.
audio input signals. fs : The input signal's sampling frequency.
Format : The number of channels in the input signal (front, surround, LFE).
Offset : The dialogue normalization correction value.
Flag : This is displayed when inputting signals including a surround back
channel. "MATRIX" is displayed with Dolby Digital EX and DTS-ES Matrix
signals, "DISCRETE" with DTS-ES Discrete signals.
This function is automatically activated when playing Dolby Digital
sources.
It automatically corrects the standard signal level for individual program
sources.
The correction value can be checked using the
The figure is the corrected value.
This cannot be changed.
HDMI Information HDMI Signal Information
Show information about • Resolution / Color Space / Pixel Depth
HDMI input/output signals
HDMI Monitor Information
and monitor.
• Interface / Supported resol.
Preset Channel A / B / C / D / E / F / G
Show information about A1 – A8 / B1 – B8 / C1 – C8 / D1 – D8 / E1 – E8 / F1 – F8 / G1 – G8
preset channels.
TUNER
68
FRANÇAIS ITALIANO ESPAÑOL
Setting details
Dialogue normalization function
STATUS
.
NEDERLANDS SVENSKA

Other settings

Remote control settings

• When you connect a remote control receiver unit (purchased separately) to the REMOTE CONTROL IN
terminal of this unit, use the following procedure to disable the remote sensor function of this unit.
• The remote sensor function of remote control signals is enabled by default.
ON/STANDBY
n Disabling the sensor function of the remote control unit
When the main unit is in standby mode, press
MENU on the main unit.
"Remote Lock:ON" is shown on the display, and the infrared light receiving function is disabled.
n Enabling the remote sensor function
When the main unit is in standby mode, press
MENU on the main unit.
The infrared light receiving function on the main unit is enabled.
NOTE
If a remote control receiver unit (purchased separately) is not connected, do not perform this setting. If you
do, you will not be able to operate this unit using the remote control unit.
MENU
o
ON/STANDBY
while holding down o and
ON/STANDBY while holding down o and