Connecting A External Power Amplifier - Marantz SR6005 User Manual

ENGLISH DEUTSCH

Connecting a external power amplifier

• You can use this unit as a pre-amp by connecting a commercially available power amp to the PRE OUT
connector. Adding a power amp to each of the channels provides an even greater sound presence.
• Select the terminal to use and connect the device.
Cables used for connections
Audio cable (sold separately)
(White)
L
Audio cable
(Red)
R
Audio cable
Power amplifier
SUB- FRONT
WOOFER
L R
R
L
L R
• When using just one surround back speaker, connect it to the left channel (L) terminal.
• Use the volume control on the subwoofer to control subwoofer volume.
• If the subwoofer volume sounds low, use the volume control provided on the subwoofer to adjust the
volume.
NOTE
• When an external power amp is connected to the PRE OUT terminal, do not connect speakers to the
speaker terminals.
• Depending on the settings in the "Amp Assign" (vpage 61) menu or listening mode, the channel output
from the SBL terminal or SBR terminal of the PRE OUT terminal differs.
22
FRANÇAIS ITALIANO ESPAÑOL
L
R
AUDIO
CENTER SURROUND SURROUND
BACK
L R L R
R R
L L
L R L R
NEDERLANDS SVENSKA