Marantz SR6005 User Manual page 59

Setting items
Component 1-RCA / 2-RCA / 3-RCA (Component video)
Set this to change the None : Do not assign a component video input connector to the selected
component video input input source.
connectors assigned to the
• At time of purchase, the settings of the different input sources are as
input sources.
shown below.
BD DVD VCR
Input
source
SAT GAME AUX1
Default
TV
1-RCA
setting
An input source to which an component video input connector cannot be
assigned is displayed as "– – –".
Default Yes : Reset to the defaults.
The "Input Assign" settings No : Do not reset to the defaults.
are returned to the default
If you select "Default" and press
settings.
Setting?" is displayed. Select "Yes" or "No", and then press
Video
Set the source video.
z "GAME" or "TV" can be set when "HDMI" (vpage 52) or "Component" (vpage 53) has been
assigned.
Setting items
Video Select Source : Play the picture and sound of the input source.
Video of another input BD / DVD / VCR / SAT / GAME / AUX1 / TV : Select video input source to
source is played back view. This can be set for individual input sources.
combined with the playing
"GAME" and "TV" can be selected only when a component video is
audio.
assigned as an input source.
NOTE
• It is not possible to select HDMI input signals.
• Input sources for which "Delete" is selected
at "Source Delete" (vpage 66) cannot be
selected.
• This can also be set by pressing
remote control unit.
Remote control operation
buttons
SVENSKA NEDERLANDS
Setting details
BD DVD VCR SAT GAME AUX1
2-RCA None 3-RCA None None
ENTER
, the message "Default
Default settings are underlined.
Setting details
V.SEL
on the
Move the cursor
(Up/Down/Left/Right)
ESPAÑOL ITALIANO
Setting items
Video Mode Auto : Process video automatically based on the HDMI content
Make settings for video information.
processing. Movie : Process video normally.
Game : Always process video appropriate for game content.
BD DVD VCR
GAME z AUX1
SAT
• If "Video Mode" is set to "Auto", the mode is switched according to the
z
TV
TV
• If a source is played in both MAIN ZONE (audio and video) and ZONE2
None
Video Convert ON : The input video signal is converted.
The input video signal is OFF : The input video signal is not converted.
converted automatically
in conjunction with the
• When a non-standard video signal from a game machine or some other
connected TV (vpage 14
"Converting input video
ENTER
. signals for output (Video
• When "Video Convert" is set to "OFF", the video conversion function
conversion function)").
BD DVD VCR
GAME z AUX1
SAT
z
TV
i/p Scaler Analog : Use i/p scaler function for analog video signal.
Convert the input source's Analog & HDMI : Use i/p scaler function for analog and HDMI video signal.
resolution to the resolution HDMI : Use i/p scaler function for HDMI video signal.
set at "Resolution". OFF : Do not use i/p scaler function.
BD DVD VCR
• "Analog & HDMI" and "HDMI" can be set for input sources for which an
GAME z AUX1
SAT
z
TV
• Which items can be set depend on the input source assigned to each
• This function is not effective when the input signal is x.v.Color, 3D,
Confirm the setting
FRANÇAIS DEUTSCH
Setting details
input contents.
(audio only) modes in the same room, audio in MAIN ZONE and ZONE2
modes may sound out of synchronization, but this is not malfunction. In
this case, setting to "Game" mode may improve audio synchronization.
source is input, the video conversion function might not operate. In this
case set "Video Convert" to "OFF".
does not work. In this case, connect this unit and TV with the same type
of cable.
HDMI input connector is assigned.
input connector.
sYCC 601 color, Adobe RGB color, Adobe YCC 601 color or computer
resolution.
Return to previous menu
ENGLISH
Input Setup
53