To Disconnect Usb Cable Safely; Verifying The Unit Is Correctly Recognized By The Computer - Panasonic VDR-D310PL Operating Instructions Manual

LSQT1150.book 104 ページ ２００７年１月１９日 金曜日 午前９時２７分
With a computer (VDR-D310/VDR-D230)
≥ When data not supported by this unit has been
recorded on a computer, it will not be
recognized by this unit.
To disconnect USB cable
safely
1
Double click the
tray.
Hardware disconnect dialog appears.
≥ Depending on your computer's settings, this
icon may not be displayed.
2
Select [USB Mass Storage
Device] and click [Stop].
3
Verify [MATSHITA DVD-RAM
LMXK1987 USB Device] or
[MATSHITA DVD Cam USB
Device] is selected and click
[OK].
Click [Close], and you can safely disconnect the
cable.
≥ If you disconnect the USB cable while the
access lamp is on or while
LCD monitor, it may damage the data.
Verifying the unit is
correctly recognized by the
computer
To verify the unit is correctly recognized by the
computer, select the unit's mode, connect the
unit to the computer via the USB cable and then
follow the steps below.
≥ With some computers including those made by
NEC, the Device Manager may not be
displayed if a mode that places restrictions on
the functions has been established. Consult
the manufacturer or follow the steps in your
computer's operating instructions to establish a
mode in which all the functions can be used,
then proceed with operation.
104
LSQT1150
1
Select [start] # ([Settings] #)
[Control Panel] # ([Performance
and Maintenance] #) [System].
icon in task
2
Click the [Hardware] tab, then
click [Device Manager].
3
Verify the following items are
displayed.
appears on the
∫ If the driver has been recognized
properly
When using a disc:
Windows XP:
≥ [MATSHITA DVD-RAM LMXK1987 USB
≥ [USB Mass Storage Device] is displayed at
Windows 2000 Professional:
≥ [MATSHITA DVD-RAM LMXK1987 USB
≥ [MATSHITA DVD-RAM LMXK1987 USB
≥ [USB Mass Storage Device] is displayed at
Device] is displayed at [DVD/CD-ROM
drives].
[Universal Serial Bus controllers].
Device] is displayed at [DVD/CD-ROM
drives].
Device] is displayed at [Disc drives].
[Universal Serial Bus controllers].