Valve Tray Replacement - Regency greenfire GF900C-NG1 Owners & Installation Manual

VALVE TRAY REPLACEMENT

PRIOR TO SERVICING THE FAN, ENSURE UNIT HAS COOLED TO
ROOM TEMPERATURE, ALL POWER IS DISCONNECTED AND GAS
SUPPLY IT TURNED OFF.
1. Remove faceplate, inner frame, glass door, and inner panels - see
instructions in this manual.
2. Remove crystals and stones if installed.
3. Remove burner side panels by lifting out as shown in Diagram 1.
Diagram 1 - Burner Tray Screw Locations
4. Remove burner by removing 2 screws in locations shown below.
Diagram 2 - Burner Screw Locations
5. Remove air deflector by removing 3 screws in locations shown
below.
Diagram 3 - Air Deflector Screw Locations
Regency GF900C-1 Gas Fireplace
6. Remove burner by removing 14 screws in locations shown below.
Diagram 4 - Valve Tray Screw Locations
7. Lift out valve tray.
Diagram 5 - Valve Tray Removal
8. Replace valve tray and reverse steps.
maintenance
43