Kohler 40COZ/33CFOZ Service Manual page 131

Reconnection Notes
Note: Position the current transformers with the dot or HI side
CT mark toward the generator set. Some generator sets have
no current transformers.
Note: Phase Rotation: A = L1, B = L2, and C = L3.
Note: All 12-lead generator sets are reconnectable. The
6-lead, 600-volt generator set is not reconnectable. Some
specially wound stators made for a single voltage are also not
reconnectable.
Note: (600-volt models only) Use 1 turn of the output lead
through the current transformer on 6-lead, 600-volt stators.
Some stators may have two turns of the output lead through
the current transformer. Continue using the original factory
two-turn current transformer wiring system.
ADV-5875A-DM
Figure 9-20 Generator Set Reconnections Sheet 1
TP-5737 5/01
WITH DIGITAL
Section 9 Wiring Diagrams 117