Outer Margin; Font Pitch - Toshiba E-STUDIO 281C Printing Manual

Hide thumbs Also See for E-STUDIO 281C:
Table of Contents

Advertisement

7 Printing from UNIX

Outer Margin

The booklet mode outer margin can be selected using the following options.
Option Value
outermargin
=value
Example: The command to select the outer margin value for booklet printing mode is
"lp -o outermargin=value filename".
Collate
The collate option can be selected using the following options.
Option Value
collate=off
collate=on
Example: The command to select collate off is "lp -o collate=off filename".
Orientation
The following orientation options are available.
Option Value
portrait
landscape
If this option is not specified the command will not be sent so the printer's default value will be
used.
Example: The command to specify landscape orientation is "lp -o landscape filename".

Font Pitch

If the pitch is specified the net_estcolor program will always select the Courier font; otherwise
the default font is used. The following options are used to select the font pitch.
Option Value
c
10
12
pitch=value
In all the cases shown above the Courier font will also be selected. When the pitch is changed
the font size will automatically be scaled to the appropriate size.
If this option is not specified, the default pitch and font will be used.
Example: The command to specify 8 characters per inch is "lp -o pitch=8 filename".
350
Printing from an Application
Alternate
Value
Select the outer margin value for booklet printing mode.
This value specifies in pixels the Outer Margin or the
"Creep" per page, which should take place while print-
ing a booklet. The valid range for value is 0 - . Default is
0.
Alternate
Value
OFF
Cancel the collate printing mode.
ON
Set the collate printing mode.
Alternate
Value
Print the document in portrait orientation.
Print the document in landscape orientation.
Alternate
Value
pitch=16.67
Set the character pitch to 16.67 characters per inch.
pitch=10
Set the character pitch to 10 characters per inch.
pitch=12
Set the character pitch to 12 characters per inch.
Set the character pitch to value characters per inch.
Description
Description
Description
Description

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-studio 351cE-studio 451c

Table of Contents