About Installation Procedure; Parallel Port Connection; Usb Connection - Toshiba E-STUDIO 281C Printing Manual

2 Installing Client Software for Windows

About Installation Procedure

Please find the installation procedure suited to your environment from the following:
P.22 "Parallel Port Connection"
P.22 "USB Connection"
P.23 "Local Area Network over TCP/IP"
P.25 "IPP Printing"
P.25 "Novell Printing"

— Parallel Port Connection

Available for:
When this equipment is connected to your computer with a printer cable, you can install the
printer drivers from the Client Utilities CD-ROM and set up the printer connection with LPT1 port.
P.27 "Installing Client Software for Parallel Printing"
Parallel printing is available only when the optional Parallel Interface is installed.
This equipment cannot connect to the same computer with both Parallel and USB at a same
time.

— USB Connection

Available for:
This equipment supports the Full Speed connection. When this equipment is connected to your
computer with the USB cable, you must install the printer drivers using the Windows Plug and
Play functions.
P.54 "Installing Client Software for USB Printing"
22 About the Installation
Windows 98, Windows Me, Windows NT 4.0, Windows 2000, Windows
XP, Windows Vista, Windows Server 2003.
Connecting with Parallel cable
Setting up the LPT1 Printer
Connection
Windows Me, Windows 2000, Windows XP, Windows Vista, Windows
Server 2003
Connecting with USB
Setting up the USB Printer
Connection
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Vista
Windows Server 2003
Windows Me
Windows 2000
Windows XP
Windows Vista
Windows Server 2003