Toshiba E-STUDIO 281C Printing Manual page 239

— Primary Tab Dialog
Tab Manufacturer
Select the product name of the tab paper that you use. This equipment supports following
tab paper.
For Letter Tab: Blanks USA copy Tabs (5 Banks) LT + 1/2" Tab
Blanks USA copy Tabs (8 Banks) LT + 1/2" Tab
For A4 Tab: KOKUYO A4-S (5 Banks)
King JIM A4-S (5Banks)
If you use tab papers other than above, select "Custom". When you select "Custom", you
must specify the tab extension manually.
Tab Extension
Enter the width of the tab extension. This must be set only when "Custom" is selected in the
"Tab Manufacturer" option.
Image Shift Width
Enter the width to shift the printed image.
For example, if you want to print text on the tab extension of Letter Tab paper, create a Letter
sized document and input the text on the right side. You must place the text at the exact
height to fit the tab extension. Also the right margin, the margin between the text and right
edge of the document, must have more than 0.2 inch or 5 mm space because the equipment
cannot print in the space. Then enter the width of the tab extension as Image Shift Width.
More than 0.2" or 5mm
Document
Must exactly
fit the tab extension
Units
Select the unit for the Tab Extension and Image Shift option. The default unit varies depend-
ing on the regional setting of the client computer.
Width of Tab Extension = Image Shift Margin
Printed Image
Setting Up Print Options 237