Oki LP-2050-MF User Manual page 206

Error Log Reference
T
(1) (2) (3)
Chapter
1
W SP A100
W SP A110
W SP C000
W SP C010
Chapter
2
W SP C020
W SP C030
W SP C100
W SP C200
Chapter
3
W SP C210
W TW 4000
W TW 6000
W TW 8300
W TW 8301
W TW 8302
Chapter
4
W TW 8303
W TW 8304
W TW 8320
W TW 8331
W TW 8333
W TW 8336
W TW 8337
Chapter
W TW 8339
5
W TW 8341
W TW 8343
W TW 833C
W TW 833D
W TW 83FF
(1) Type (2) Character string (3) Error number
206
LP-2050/LP-2050-MF User's Manual for Basic Printer Operation
Message
Cannot Determine Data Format automatic identification failed
Fomat
No PDL Choice(Port %d) Not even 1 valid PDL at port %d
Spool Mng File Not Found No spool management file
Previous shutdown may not have been
performed correctly
Spool Mng File Broken Spool management file error
Spool Data Restore Fail Deleted the corresponding data item
because of spool data restore failure
Unknown File Removed Deleted unknown files not matching the
management data in the spool partition
Spool Data Removed - Job Deleted the spool data not compatible with the
job list
Unmatch
Spool area overflow XX Entered the spool area overflow status
XX: Area number
Recover spool overflowl XX Recovered from the spool area overflow status
XX: Area number
Twain : error taskIF Fatal error occurred during communication
initialization between tasks
Twain : warn setup Cannot read the setup correctly
Twain : use socket Socket general error
Twain : proc socket Socket process error
Twain : undefine command Socket command error
Twain : read socket Socket read error
Twain : write socket Socket write error
Twain : broken pipe Network error
Twain : addr not avail Network error
Twain : net unreach Network error
Twain : connect reset
Twain : no buffer
Twain : not connect
Twain : host unreach
Twain : host down
Twain : time out
Twain : connect refused
Twain : others (net)
Network errors other than above
Meaning
Check the print data.
Change the Printer's port settings,
and restart the Printer.
-
-
-
-
-
-
-
Contact your nearest service
representative.
Restart the Printer.
• Check the communication status
with the ping command.
• Check the network cable
connection and disconnection.
• Check that the computer power is
on.
• Check that the router/switch power
is on.
• Check the Printer's network
settings.
• Check the computer's network
settings.
• Check the other network settings.
If the error persists, replace the ARC
substrate.
Action