Setup Items In Pdl Setting Menu; Available Data Formats; Automatic Data Format Identification - Oki LP-2050-MF User Manual

Setup Items in PDL Setting Menu

Chapter
1
‹ Available Data Formats
Chapter
2
Chapter
3
Chapter
4
Chapter
5
‹ Automatic Data Format Identification
108
LP-2050/LP-2050-MF User's Manual for Basic Printer Operation
In the PDL Setting menu, set the parameters for printing.
The data formats shown in the following table can be used with this Printer.
Panel Display
This is OKI Data Infotech's original D-SCAN format. D-SCAN raster
D-SCAN
data is also supported.
This data format is compatible with HP-GL, HP-GL/2, and HP RTL
HP-GL
from HP. (Compatible with HP Designjet 1055CM)
TIFF
This data format is compatible with TIFF Revision 4.0.
CALS
This data format is compatible with CALS Raster Type I.
TIP
‘ In this manual, PDL is used as a generic term for all the data formats
above.
‘ For the commands supported by this Printer, see
Appendix.
The Printer has a function that automatically detects and processes the format of
the received data.
With this function, data in different formats are sent to a single channel or port for
printing.
The Printer automatically identifies and processes the received data in the four data
formats: D-SCAN format, HP-GL format, TIFF format, and CALS format.
The following PDL parameters are specified in the PDL Setting menu.
- Paper Parameters
- Drawing Parameters
- Scale Parameters
Data Formats
Command Lists in the