Cooking With Your Timer; Auto Off Timer; Electronic Clock - Westinghouse GOR474 User Manual

COOKING wItH YOUR tIMER

2 HOUR "AUtO OFF" tIMER
The 2 hour timer features an automatic oven "cut off" .
This means that a cooking period of up to 120 minutes
can be set . When the timer has counted back to "Auto
Off," a bell will sound and the oven will automatically
switch off .
Once automatic baking is complete, return to manual
operation by setting the timer to the "OFF" mark.
90 MINUtE "AUtO OFF" tIMER
The 90 minute timer features an automatic oven "cut off" .
This means that a cooking period of up to 90 minutes can
be set . When the timer has counted back to "Auto Off," a
ding will sound and the oven will automatically switch off .
80
60
Once automatic baking is complete, return to manual
operation by setting the timer to the 'OFF' mark.
uto-off' timer
Note: It is not recommended to use this timer for short
durations (e .g . boiling eggs) .
OpERAtING tHE ELECtRONIC CLOCK
ELECtRONIC CLOCK tOUCH CONtROL
80
60
GENERAL FEAtURES
Your touch control clock has the following features:
• Timer – allows you to set a countdown time that will beep
when the set time has elapsed .
• Cooking duration – You can set a cooking duration.
A timer will count down the preset cooking time, beep
when the time has elapsed and turn the oven off .
• End cooking time – you can set a cooking finish time. A
timer will count down the preset cooking time, beep when
the finish time has been reached and turn the oven off .
• Delayed start cooking time – You can combine the
cooking time and stop cooking time to switch the oven
on and off at a specific time during the day .
Note: Your touch control clock only operates with your
main oven .
SEttING tHE tIME OF DAY
You must set the time of day before you can operate your
appliance . When power is supplied to your oven "12 .00"
will be displayed and the "clock" indicator will flash .
1. To set the time of day in hours and minutes, press – or
+. 5 seconds after the last change, the "clock" indicator
will disappear, confirming the time has been set .
Note: The clock has a 24-hour display .
CHANGE tHE tIME OF DAY (DAYLIGHt SAvING)
1 . Press "mode" until the "clock" indicator begins flashing .
2. Press – or + to change the time. 5 seconds after the
last change, the "clock" indicator will disappear,
confirming the time has been set .
SEttING tHE tIMER
1 . Press "mode" until the "timer" indicator begins flashing .
2. Set the countdown time you want by using – and +. 5
seconds after the last change the "timer" indicator will
stop flashing, confirming the timer has been set .
3. To stop the beeper, press –, + or "mode".
SEttING tHE COOKING DURAtION
1 . Check the clock displays the correct time of day .
2 . Select the desired oven function and temperature .
The oven indicator light will glow and the heating source
will come on .
3 . Press "mode" until the "cook time" indicator begins
flashing .
4. Set the cooking duration you want by using – or +. 5
seconds after the last change, the "cook time" indicator
will stop flashing, and the time of day will be displayed .
Note: Do not forget to add preheating time if necessary .
OPERATION
9