Activating/Deactivating Auto Answer; Changing The Handsfree/Earpiece Volume; Changing Ringtones - Gigaset C300 Manual

light and perform the relevant key func-
tion.
Please note
If the backlight is turned on outside
the charging cradle, the standby time
for the handset is considerably
reduced!
Activating/deactivating auto
answer
If this function is activated, you can simply
lift the handset out of the charger without
having to press the talk key c when you
receive a call.
¤ Settings ¤ Telephony
§Menu§
¤ Auto Answer
§OK§
Press display key (
Changing the handsfree/
earpiece volume
You can set the volume for handsfree mode
and earpiece mode to five different levels.
In idle status:
t ¤ Call Volume
Earpiece Volume / Handsfree Volume
Select and press
q
Set the volume
(e.g., volume 3 = ‰ ).
§OK§
Press the display key to save the
setting.
During a conversation via the earpiece or in
handsfree mode:
t
Press the control key to open
the menu for setting the vol-
ume. Set the earpiece or hands-
free volume by pressing q.
The setting will automatically be saved after
approximately 3 seconds, if not then press
§OK§
the display key .
Please note
You can also set the call volume using the
menu (¢ page 23).
³
= on).
§OK§
.

Changing ringtones

u Volume:
You can choose between five volumes
(e.g., volume 2 = ˆ ) and the "cre-
scendo" ring (volume increases with
each ring = ‡ ).
u Ringtones:
You can select a ringer from a list of pre-
loaded melodies.
You can set different ringtones for the fol-
lowing functions:
u Internal calls
u External calls:
u Alarm clock
Setting the ringer volume
The ringer volume is the same for all types of
ring.
In idle status:
t ¤ Ringer Volume
q
Set the volume.
§OK§
Press the display key to save the
setting.
Please note
You can also adjust the ringer volume via
the menu (¢ page 23).
Setting the ringer melody
Set different ringer melodies for external
calls, internal calls and the alarm clock.
For internal calls and the alarm clock
In idle status:
t ¤ Ringtones (Handset)
Internal Calls / Alarm Clock
Select and press
q
Select melody and press
³
( = selected).
Handset settings
§OK§
.
§OK§
43