NEC Express5800 User Manual page 78

16. Insert the four fan housing tabs into the fan installation slots on the hard disk
cage and slide the fan towards the bottom of the cabinet. The fan clicks as it
is locked in position.
17. Connect the power and interface cables to the hard disk drive (s).
Attach connector P10 of a power cable coming from the power supply to the
first (master) hard disk and connector P9 of another power cable to the
second (slave) hard disk.
Attach the interface cable connector with the black tag to the first (master)
hard disk drive and the connector with the gray tag to the second (slave)
hard disk drive (if applicable). See Figure 27.
4-24 Upgrading Your System
Figure 4-26. Installing the Fan
Figure 4-27. Installing the Interface Cables