Secure Mode; System Hardware Menu - NEC Express5800 User Manual

Secure Mode

Feature
Secure Mode Timer
Secure Mode
Hotkey
Ctrl+Alt+
Secure Mode Boot

System Hardware Menu

Feature
Thermal Sensor
Wake On Events
AC Link
Error Log
Initialization
Console
Redirection
3-12 Configuring Your System
Choices or Display
Only
Disabled
1 min
2 min
5 min
10 min
30 min
1 hr
2 hr
Disabled
Enabled
Any key
Disabled
Enabled
Choices or
Display Only Description
Refer to Thermal Sensor
Submenu.
Refer to Wake On Events
Submenu.
Power On Determines the mode of AC
Last State Link.
Stay Off
No Request to initialize the Error
Yes Log now.
If Clear OK, then display
"System Event Log Cleared!"
If Clear NG, then display
"System Event Log Not
Cleared!"
Additional setup menu to
configure console.
The Boot-Time diagnostic
screen is enabled if redirection is
enabled.
Description
Select a time period to
place the server in the
Secure Mode after the last
keyboard or mouse
activity.
Select "Disabled" to
prohibit the Secure Mode.
Enable or disable
activation of the Secure
Mode with a key entry.
Specify the key to use for
activating the Secure
Mode. Press the
specified key while
holding down the Ctrl and
Alt to activate the Secure
Mode. Activation of the
Secure Mode with a key
entry is available when
"Enabled" is selected for
"Secure Mode Hotkey".
Specify whether to place
the server in the Secure
Mode at start-up.
Your Setting
Your Setting