5.2
Loading the original onto the Original Glass
5.2
Loading the original onto the Original Glass
Original available on the Original Glass
Item
Original types
Max. original size
Original loading capaci-
ty
Loading the original onto the Original Glass
Using the Original Glass allows you to scan an original such as a book or card, which is not available in the
ADF.
1
Open the ADF.
2
Load the original into the Original Glass with the side to be photocopied facing downward.
% Place the top side of the original at the back, and align the original to the
the Original Scale. When loading in a different orientation, be sure to specify the loading direction
of originals.
% When copying a highly transparent original such as transparencies or tracing paper, place a blank
sheet that is the same size as the original on the original to enable clear scanning.
NOTICE
Do not place an original heavier than 3 kg on the original glass. Furthermore, do not use excessive force
to press down on a book or any other form of original that must be spread on the original glass. Other-
wise, the machine may be damaged or a failure may occur.
3
Close the ADF.
NOTICE
When placing a thick book or a three-dimensional object on the original glass, you do not need to close
the ADF to scan it. A bright light may be emitted through the Original Glass. Be careful not to look di-
rectly at it. Note, however, that the light coming through the original glass is not a laser beam, and will
not expose the user to related hazards.
d-COLOR MF3100
Specifications
Sheets, books (two-page spread), cards, three-dimensional objects
A4
Max. 6-5/8 lb (3 kg)
5
mark at the left rear of
5-5