NEC HT1100 User Manual page 41

Deleting Captured Images
Using the Delete command on the Viewer menu allows you to delete
captured images.
To delete captured images:
Preparation: Make sure that the PC card is inserted into the PC card
slot of the projector.
1. Press the VIEWER button on the remote control to display an image.
2. Press the MENU button to display the Viewer menu.
3. Use the button to select "Thumbnails" and then press the ENTER
button.
The Thumbnail screen will be displayed.
Slot 1
3 Files
_CAP_
_RESTORE
RECYCLED
0000.jpg
1/3 0000.jpg 60KB
select : ENTER
NOTE: To change highlight from the Thumbnails screen (right window) to a
directory tree (left window) , press the CANCEL button. To return highlight to
the Thumbnails screen, press the ENTER button.
4. Use the buttons to select an image you wish to delete.
5. Press the MENU button to display the Viewer menu.
6. Use the button to select "Delete" and then press the ENTER but-
ton.
7. Use the
This completes deleting.
To delete all the captured images:
1. Repeat steps 1 to 3 in the above described procedure.
2. Press the CANCEL button to select the "_CAP_" folder in the direc-
3. Press the MENU button to display the Viewer menu.
0001.jpg 0002.jpg
4. Use the
5. Use the
This completes deleting.
E-41
A confirmation message will be displayed.
button to select "OK" and then press the ENTER button.
tory (left window).
Slot 1
3 Files
_CAP_
_RESTORE
RECYCLED
0000.jpg
1/3 0000.jpg 60KB
select : ENTER
button to select "Delete" and then press the ENTER but-
ton.
A confirmation message will be displayed.
button to select "OK" and then press the ENTER button.
0001.jpg 0002.jpg