Turning Up Or Down Volume; Turning Off The Projector - NEC HT1100 User Manual

Turning Up or Down Volume

Sound level from the speaker on the projector can be adjusted when
the menu is not displayed.
LIGHT
VIDEO
COMPUTER
COMP.
decrease volume
MENU
decrease volume
Volume bar
POWER
COMPONENT
S-VIDEO COMP.V
DVI
increase volume
ENTER
CANCEL
increase volume

Turning off the Projector

To turn off the projector:
First press the POWER (ON/STAND BY) button on the projector cabi-
net or the POWER button on the remote control for a minimum of two
seconds.
The power indicator will glow orange. After the projector turns off, the
cooling fans keep operating for 90 seconds (Cooling-off time).
Second, turn off the Main Power switch. The power indicator will go out.
Last unplug the power cable.
CAUTION
Do not unplug the power cable from the wall outlet or do not turn
off the main power under any one of the following circumstances.
Doing so can cause damage to the projector:
• While the Hour Glass icon appears.
• While the message "Please wait a moment." appears. This mes-
sage will be displayed after the projector is turned off.
• While the cooling fans are running. (The cooling fans continue
to work for 90 seconds after the projector is turned off).
• While accessing a PC card. (The PC Card Access indicator lights.)
E-22
POWER
LIGHT
COMPONENT
VIDEO S-VIDEO COMP.V
COMPUTER
COMP. DVI
ENTER
MENU CANCEL