Sharp XL-UH3H Operation Manual page 251

Tape Playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE button to select "TAPE" function. "TAPE"
appears.
3
Press the STOP/EJECT / button to open the cassette
holder.
4
Load a cassette into the cassette compartment with the
side to be played facing towards you. After loading the cas-
sette push the cassette holder back into position.
5
Press the PLAY button to begin playback.
6
Press the STOP/EJECT / button to stop playback at any
time. Press it again to remove the cassette. When the end
of the tape has been reached, automatic stop will be acti-
vated.
Pause
Press the PAUSE button to temporarily stop playback or record-
ing. Press it again to resume operation.
Fast forward and rewind
Press the F.FWD or REWIND
location has been reached, press the STOP/EJECT
Automatic stop system:
At the end of the tape whilst recording or playing back, the cas-
sette deck stops automatically and the button are released.
This system does not work in fast forward and rewind operation.
Be sure to press the STOP/EJECT
the tape has been reached.
Press the STOP/EJECT / button after approximately 2 min-
utes have elapsed under fast forward and rewind operation.
Caution:
Do not press the PAUSE button whilst the fast forward or re-
wind operations are in progress. The REWIND
button will not be released when the tape end is reached. Once
this occur press the STOP/EJECT
Before changing from one tape operation to another, press the
STOP/EJECT / button.
XL-UH3H
ENGLISH
button. When the desired
/ button.
/ button when the end of
or F.FWD
/ button.
E-28
8