Sharp XL-UH3H Operation Manual page 248

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 224
Advanced USB/SD playback (continued)
XL-UH3H
ENGLISH
Repeat play (REMOTE CONTROL ONLY)
Repeat play can play single track and all track sequence continu-
ously.
RANDOM
REPEAT
Each time press the button, the repeat mode changes in the following
order:
In case of an USB/SD mode:
Random play (REMOTE CONTROL ONLY)
The tracks can be played in random order automatically.
To random play all tracks:
Press the RANDOM button on the remote control so that the ran-
dom indicator light up in the display window.
FOLDER
E-25
1
FOLDER 1
WMA
MP3
USB
RANDOM
RANDOM
MP3
USB
To cancel random playback, press the button again, so that the ran-
dom indicator will disappear.
Notes:
If you press the
or
button during random play, you
can move to the track selected next by the random operation.
In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
During random play, repeat function is not possible.
In random function, playback will stop after all the tracks are
played randomly.
Caution:
After performing repeat, be sure to press the
Otherwise, it will play continuously.
Note:
(
) When in folder mode, the selected playmode can be used for the
files in the selected folder only.
Notes:
This unit only supports "MPEG-1 Audio Layer-3" format.
(Sampling Frequency is 32, 44.1, 48kHz)
"MPEG-2 Audio Layer-3", "MPEG-2.5 Audio Layer-3" and MP1,
MP2 format are not supported.
Playback order for MP3 files may differ sometimes depending on
the writing software used during file download.
Bitrate which is supported by MP3 is 32~320 kbps, WMA is
64~160 kbps.
For MP3/WMA files, please put ".MP3" ".WMA" extension. Files
cannot be played back if there is no MP3/WMA extension.
Playlists are not supported on this unit.
This unit only supports MP3 ID3-Tag version 1.x.
The display playback time may not be displayed correctly when
playing back a variable bitrate file.
WMA meta tag also supports title, artist and album name which
are recorded in WMA files.
Copyright protected WMA files cannot be played back.
button.

Advertisement

Table of Contents
loading

Table of Contents