General Control - Sharp XL-UH3H Operation Manual

General control

To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Auto power off function
In the stop mode of CD/USB/SD operation, the main unit enters the
stand-by mode after 10 minutes of inactivity.
Volume auto set-in
If you turn off and on the main unit with volume set to 16 or
higher, the volume will start at 16.
If you turn the unit off then on again with the volume level set to
less than 15, it will turn on again at the level set.
Volume control
Main unit operation:
When the VOLUME control is turned clockwise, the volume will
increase. When it is turned anti-clockwise, the volume will decrease.
Remote control operation:
Press the VOLUME (+ or -) button to increase or decrease the volume.
01 ...
MIN
Equaliser
When the EQUALIZER button on the remote control is pressed, the
current mode setting will be displayed. To change to a different
mode, press the EQUALIZER button repeatedly until the desired
sound mode appears.
FLAT (Display off)
ROCK
CLASSIC
POPS
JAZZ
X-BASS
When the X-BASS button on the remote control or main unit is
pressed, the unit will enter the extra bass mode which emphasises
the bass frequencies and "X-BASS" will appear. To cancel the extra
bass mode, press the X-BASS button again.
XL-UH3H
ENGLISH
30 MAX
E-10
8